Timmermade Kinglet full zip down jacket

Clothing
>
Kinglet down jacket (custom size)

Kinglet down jacket (custom size)

SKU:

$320.00

$320.00 - $420.00

Unavailable

per item

Kinglet is a full zip down jacket with 4 inch wide sewn through baffles. This spacing minimizes sewn through cold spots and maximizes loft between lines while maintaining sufficient fill control. Average is around 1.25 inch of loft and a hooded medium get's 4.1oz of 950fp down. A collar medium get's 3.7oz of 950fp down.Argon 67 outer shell is 0.67oz/square yard and very breathable. Nothing beats down for weight and compressibility for any given warmth. It's drawback has always been that if exposed to moisture it will lose loft. However, now with treated down that can handle moisture much better, the range of use is extended. It has vertical side seam zippered pockets (they can be left off if noted to timmermade@gmail.com).

Available with a hood or collar.

A size medium 950fp with a hood is approximately 9oz. A medium 950 with a collar is approximately 8.6oz.

Sizing is custom made to your measurements. Enter measurements in body dimensions and the desired garment size. If you need advice on this, email timmermade@gmail.com. Post- sale modification is available at an hourly rate plus shipping charges.

Color - type color choice here (see pictures) *

Torso - enter the length from the divot at the top of your sternum, near your collar to your belt line AND to where you want the garment to reach in inches. Erect posture, deep breath in.

Back - enter the length from your vertebra at the base of the neck in back, down to your belt line AND to where you would like the garment to reach in inches

Shoulders - enter the circumference around both of your shoulders/chest AND the circumference you want the garment in inches. Deep breath in. The garment size usually needs to be at least 5" larger than shoulders. *

Chest - enter the circumference of your chest at arm pit height AND the circumference you want the garment in inches. Deep breath in.

Midsection/Waist - enter the circumference of the widest part of your waist/belly AND the circumference you want the garment in inches

Hips - enter the circumference of your hips AND the circumference you want the garment in inches *

Arm - enter the length from the outside top of shoulder (AC joint) down to your wrist AND to where you want the sleeve to reach in inches

Shoulder arm hole - enter the circumference from the top of your shoulder, under your arm pit back to the top AND the circumference you want the garment arm hole to be. This is where the arm connects to the body at the shoulder/arm pit.

Bicep - enter the circumference around the widest part of the arm *

Cuff - enter the circumference of your wrist AND the max circumference you want the elastic cuff to stretch to. Or enter loose cuff and the circumference you want it to be.

Neck - enter the circumference of your neck AND the circumference you want the collar or hood to be

Quantity

Add to Cart